Indmar Marine J-Formed Hose with Spring | Part #845040 Ensure reliable coolant flow with this genuine Indmar J-formed hose complete with internal spring. The integrated spring prevents the hose from collapsing under suction — a common problem on marine engines where cooling system pressure and flow rates are critical to preventing overheating on the water. Compatible with: Indmar marine engines fitted to Malibu, Moomba, Supra, and Tige boats.
Indmar Marine Oil Filter – Ford Spin-On | Part #872025 Protect your Ford-based Indmar marine engine with this genuine Indmar spin-on oil filter. The spin-on design makes servicing fast and clean — simply unscrew the old filter and spin on the new one. No cartridge housing to remove, no mess, no special tools required. Engineered specifically for Indmar marine applications to deliver the precise filtration your engine needs to stay clean, protected, and running at peak performance all season long. Compatible with: Indmar Ford-based marine engines .
CHEVROLET THERMOSTAT HOUSING 1 PIECE NLA.-USE 531067S THERMOSTAT HOUSING 2EA 605034 1/2" PIPE PLUGS AND 551004 GASKET. (Remove hoses going to elbow fittings in intake. Install 1/2" pipe plugs in place of those fittings)
PORT SIDE EXHAUST ELBOW USED ON 5.7 CAT MANIFOLDS 2011 THRU CURRENT USE 765006 GASKET, 735020 V-BAND CLAMP. Indmar Marine Exhaust Elbow – Catalyst Extended Port | Part #585018 Keep your exhaust system flowing freely and your engine running clean with this genuine Indmar catalyst exhaust elbow, extended port design. A critical component in your Indmar marine exhaust system — the exhaust elbow directs hot exhaust gases away from the engine while the integrated catalyst helps reduce harmful emissions, keeping your boat compliant with Australian marine environmental standards.
Indmar Marine Spark Plug – Ford 6.2L CYFS-12FP | Set of 16 | Part #597037-16 Keep your Indmar Ford 6.2L firing at full power with this genuine CYFS-12FP spark plug set — a complete set of 16 plugs for the Ford 6.2L marine engine. The Ford 6.2L is a high performance V8 engine running a dual plug per cylinder ignition system — meaning 16 plugs per engine rather than the standard 8. Always replace the full set together for balanced ignition performance across all cylinders. ⚠️ IMPORTANT — Supercharged 575 Models: DO NOT USE THIS PLUG IN SUPERCHARGED 575 MODELS. If your boat is fitted with the Supercharged 575 engine you must use: 597128 – Spark Plug Supercharged 575 Using the incorrect plug in a supercharged engine risks serious engine damage. If you are unsure which engine your boat is fitted with Contact Us
Indmar Marine Raw Water Pump Impeller | Part #685007 The single most important annual service part for your Indmar engine — this genuine Indmar raw water pump impeller should be replaced every season without exception. A healthy impeller means a healthy cooling system. A failed impeller means no cooling water flow and a catastrophically overheated engine in minutes. This small rubber component is without question the cheapest insurance policy you can buy for your Indmar marine engine. Compatible with: Indmar marine engines with Johnson raw water pumps fitted to Malibu, Moomba, Supra, and Tige boats. Contact us to verify fitment for your specific model year before ordering.